Additives for Lubricants & Functional Fluids

NA-SUL® - Neutral Metal Salts

ProductChem. DescriptionFeatures and Benefits
NA-SUL 707Lithium Dinonylnaphthalenesulfonate (0.76%)Low ash rust inhibitor with good high temperature stability in industrial oils and greases. Retards bleeding in lithium soap greases.
NA-SUL 729Calcium Dinonylnaphthalenesulfonate (2.1%)Outstanding demulsification properties, excellent filterability (dry and wet), thermal and hydrolytic stability. Highly effective dispersant for solid additives.
NA-SUL BSNBarium Dinonylnaphthalenesulfonate (6.6%)Non-staining rust inhibitor with outstanding demulsibility at all additive levels. Excellent thermal stability and compatibility with other additives. Outstanding synergy with other antirust additives.
NA-SUL MGMagnesium Dinonylnaphthalenesulfonate (1.3%)Low ash rust inhibitor with excellent filterability and hydrolytic stability. Synergy with other antirust additives. Promotes the formation of highly water-resistant films. 
NA-SUL SSSodium Dinonylnaphthalenesulfonate (2.4%)Forms a highly polar, hydrophobic film which is strongly bonded to metal surfaces. Solubility characteristics allow use in oil or water systems. Does not emulsify or demulsify.
NA-SUL ZSZinc Dinonylnaphthalenesulfonate (2.8%)Excellent demulsibility, thermal and hydrolytic stability. Good filterability (dry and wet). Synergistic with ZnDTPs and antioxidants.
na-sul®---neutral-metal-salts.pdf

NA-SUL® - Basic Metal Salts

ProductChem. DescriptionFeatures and Benefits
NA-SUL BSBBarium Hydroxide Dinonylnaphthalenesulfonate (11.7%)Excellent rust and corrosion protection performance. Reserve alkalinity for acid neutralization (TBN 45). Superior demulsibility. Acid neutralizing and deactivating properties. Works as an HCl scavenger when used in combination with chlorinated paraffins.
NA-SUL CA-50Carbonated Calcium Dinonylnaphthalenesulfonate (3.2%)Outstanding rust protection performance in fresh and salt water environments. Excellent demulsibility. Reserve alkalinity for acid neutralization (TBN 50). Protection against acid atmosphere. Works as an HCl scavenger when used in combination with chlorinated paraffins.
na-sul®---basic-metal-salts-.pdf

NA-SUL® - High Temperature Products

ProductChem. DescriptionFeatures and Benefits
NA-SUL BSN-HTBarium Dinonylnaphthalenesulfonate/
Carboxylate (8,7%)
Excellent thermal and oxidative stability. Outstanding demulsibility. Exhibits outstanding additive compatibility and reduced moisture sensitivity. Low odor. Excellent solubility in highly paraffinic base stocks.
NA-SUL CA-1089Calcium Dinonylnaphthalenesulfonate/
Carboxylate (2.2%)
Outstanding non-staining properties. Excellent demulsibility, filterability (dry and wet), thermal and hydrolytic stability. Resists gelling when contaminated with water. Excellent solubility in highly paraffinic base stocks. 
NA-SUL CA-HT3Calcium Dinonylnaphthalenesulfonate/
Carboxylate (2.5%)
Outstanding high temperature stability and good demulsibility. Low odor, no characteristic petroleum oxidate odor. Easy handling, no melting required.
NA-SUL MG-HTMagnesium Dinonylnaphthalenesulfonate/
Carboxylate (1.7%)
Offering exceptional rust protection with outstanding high temperature stability. Good demulsibility and low odor. Excellent solubility in a wide range of base stocks. Stabilize chlorinated paraffins regarding HCl corrosivity and staining.
NA-SUL ZS-HTZinc Dinonylnaphthalenesulfonate/
Carboxylate (3.8%)
Excellent rust inhibitor, particularly in systems with other zinc containing additives. Exhibits antioxidation synergism with primary AOs in petroleum and PAO base fluids. Synergistic with ZnDTPs
na-sul®---high-temperature-products.pdf

NA-SUL® - Rust Preventive Concentrates

ProductChem. DescriptionFeatures and Benefits
NA-SUL CA-1082Calcium Dinonylnaphthalenesulfonate/
Carboxylate (1,4%)
Good demulsibility, free flowing liquid, no melting required. Resists gelling in the presence of bulk water. Low odor, does not contain petroleum oxidates. Excellent solubility in highly paraffinic base oils and PAO.
NA-SUL CA-1089Calcium Dinonylnaphthalenesulfonate/
Carboxylate (2.2%)
Outstanding non-staining properties. Excellent demulsibility, filterability (dry and wet), thermal and hydrolytic stability. Resists gelling when contaminated with water. Excellent solubility in highly paraffinic base stocks.
NA-SUL CA-1122Calcium Dinonylnaphthalenesulfonate/
Carboxylate (2.4%)
Excellent solubility in highly paraffinic base oils, PAO and vegetable oils. Free flowing liquid, no melting required. Low odor, does not contain petroleum oxidates. 
NA-SUL CA-1183Calcium Dinonylnaphthalenesulfonate/
Carboxylate (2.6%)
Excellent multi-metal corrosion inhibitor, outstanding water displacement properties. Particularly effective on galvanized steel. Resists gelling from water contact, mild odor, no oxidate wax.
NA-SUL CA-1259Calcium Dinonylnaphthalenesulfonate/
Carboxylate (1.6%)
Excellent water displacement, resists gelling in the presence of bulk water. Minimizing the need for heating prior to use. Improved solubility enables use in a wide variety of diluents. Contains <10% waxy materials.
NA-SUL CA/W1146Calcium Dinonylnaphthalenesulfonate/
Oxidates/
Metal Soaps/Carboxylacids (2.0%)
Recommended for heavy duty applications, such as sheltered outdoor storage and marine environments. Best in naphthenic oils. Excellent salt fog protection, effective in acid atmospheres. 
NA-SUL CA/W1177Calcium Alkylarylsulfonate/Carboxylate /Oxidated Petrolatum (1.4%)Very good water displacement. Resists gelling from water contact. Compatible with contamination by most alkaline cleaners and metalworking fluids. Can be combined with waxes and resins for specialty applications.
NA-SUL CA/W1213Calcium Alkylarylsulfonate/Carboxylate /Oxidated Petrolatum (1.4%)Liquid, wax containing additive specifically designed for use in harsh environments. Forms extremely hydrophobic thin films giving superior metal protection.
NA-SUL CA/W1935Calcium Dinonylnaphthalenesulfonate/
Petroleum Oxidate (1.5%)
Relatively low melting point. Useful for both thin and thick film rust preventive fluids. Very good water displacing properties. Improves resistance to water washout of greases. Excellent moisture displacing properties.
na-sul®---rust-preventive-concentrates-.pdf

K-CORR® - Non Sulfonate Chemistry

ProductChem. DescriptionFeatures and Benefits
K-CORR 1031Proprietary Carboxylic Acid/ Amide Chemistry (N 3.3%)Excellent solubility in low polarity base oils. No detrimental influence on the AFNOR (dry/wet) and FZG performance. Synergistic AW performance with selected EP chemistries.
K-CORR 1227Mixture of Organic Amino Acid and Imidazoline DerivativeImproves performance in humidity, salt fog. Especially where corrosive residues of combustion form on metal surfaces. Boost CI performance. Effective at low treat levels.
K-CORR G-1107Proprietary Ashless Rust Inhibitor and Antiwear Additive (N 3.6%)Metal-free rust inhibitor with excellent AW properties. Especially fulfill severe rust requirements in greases, Emcor seawater test. Good thermal and hydrolytic stability, effective at low treat levels.
K-CORR G-1270Proprietary Preparation of Zinc Phosphorus Containing Chemistry
(Zn 13.5%)
Especially fulfill severe rust requirements in greases, Emcor 100% synthetic seawater. Excellent antiwear performance,  effective at very low treat levels, low odor.
k-corr®---non-sulfonate-chemistry.pdf

K-White® - Corrosion Inhibiting Pigments

ProductChem. DescriptionFeatures and Benefits
K-White G105Modified Aluminium TriphosphateActive pigment with excellent corrosion protection and very low toxicity for oil based systems. Passivates iron and non-iron substrates through binding of unsoluble Phosphate Complexes.
k-white®---corrosion-inhibiting-pigments.pdf

NA-SUL® - water soluble/miscible Sulfonates

ProductChem. DescriptionFeatures and Benefits
NA-SUL 437Dinonylnaphthalene Sulfonic Acid/
Organic Acid Complex/Amine
Easily cut back in cold and warm water, solutions are clear an very hard-water tolerant. Excellent in CI containing solvents. Deposits a thin film upon metal parts that becomes hydrophobic during drying. Exhibits exceptional storage stability. Ideal for dip application.
na-sul®---water-soluble/miscible-sulfonates-.pdf

NA-SUL® - water emulsifiable Sulfonates

ProductChem. DescriptionFeatures and Benefits
NA-SUL 450Calcium Dinonylnaphtalenesulfonate/ Carboxylate/Alkanolamine (0,7%)/EsterFree of mineral oil concentrate with excellent emulsifiable properties. Good rust protection for steel during storage and transportation. Deposits extremely thin hydrophobic films. Coating @ 5% is dry; Coating @ 10% is nearly dry.
NA-SUL 1101Ammonium Dinonylnaphthalenesulfonate/CarboxylateHighly effective and ashless protection of aluminum and zinc alloys. Low odor, does not contain petroleum oxidates. Excellent solubility in highly paraffinic base oils and PAO. Free flowing liquid, no melting required. Can be emulsified at moderate pH level.
na-sul®---water-emulsifiable-sulfonates.pdf

CORRGUARD® - Alkanolamines

ProductChem. DescriptionFeatures and Benefits
AEPD®-852-Amino-1,3-Ethyl-Propan-Diol (85%)Primary amino alcohol which provides a good balance of pH development and reserve alkalinity properties. Improved ferrous corrosion protection and excellent for aluminium processing. Acts as a formaldehyde and sulphur odor scavenger. Reacts reversibly with formaldehyde. Reduces cobalt leaching more than TEA. Enhanced performance of triazine biocides.
AEPD® VOX 10002-Amino-2-Ethyl-1,3-Propane-Diol (85%)Multifunctional primary amine with very mild odor. Low-VOC (< 5g/L), more efficient than other low-VOC alkanolamines. Especially suitable on aluminium.
ALKATERGE®-E4-Ethyl-2-(8-Heptadecenyl)-2-Oxazoline-4-MethanolLiquid corrosion inhibitor for iron and steel alloys. Low Foaming. Mild oxidative properties. Primary emulsion stabilizer for water-in-oil emulsions, secondary oil-in-water emulsifier. Non-ionic (stable in hard water).
CORRGUARD® series2-Amino-2-Methyl-1-Propanol (75% / 90% / 95%)Very cost efficient neutralizer of acidic ingredients such as carboxylic acids and phosphate esters. Stable emulsion at high pH level with a high base strengh for an extended fluid life. Acts as formaldehyde scavenger. Minimal ammonia release. Minimizes leaching of cobalt and lead.
CORRGUARD® LSA series2-Amino-2-Methyl-1-Propanol (75% / 90% / 95%)High performance primary alkanolamine with very low secondary amine content (< 0.75%, meets TRGS 611). Stable emulsions at high pH. Minimal ammonia release, cobalt leaching and foam generation. High base strength.
CORRGUARD® FLEX2-Amino-1-Butanol,2-Amino-2-Ethyl-1,3-Propanediol (85%)Unique primary amino alcohol stream suitable for low secondary amine formulations. Improved corrosion control on steel and its alloys. Extends fluid life with a wide range of registered biocides. Effective pH control, easy to handle and easy to formulate (100% water soluble). Meets TRGS 611.
CORRGUARD® EXT3-Amino-4-Octanol (85%)Innovative premium neutralizer for Long-Life Metalworking Fluids. Excellent pH stability, low foam generation. Improves corrosion control of iron and steel alloys. Resists extraction into tramp oil. Facilitates formulation of Al-compatible fluids at higher pH. Excellent for low boron and boron-free formulations. Compliant with TRGS 611.
DMAMP-80®2-Dimethylamino-2-Methyl-1-Propanol (80%)Tertiary neutralizing amine, can act as vapor-phase corrosion inhibitor for iron and steel alloys in waterborn systems and various aerosol formulations. Very high base strength for neutralizing acids. Suitable for low secondary amine formulations.
corrguard®---alkanolamines.pdf

LUVODUR® - Dicarboxylic Acids

ProductChem. DescriptionFeatures and Benefits
LUVODUR CI DCA 912Mixture of C9, C11 and C12 Linear Dicarboxylic AcidsHighly effective corrosion inhibitor for water soluble fluids. Extremly hard water tolerant with a low foaming character.
LUVODUR L 190-502,4,6-Tri-(6-Aminocaproic Acid)-1,3,5-TriazineHighly effective corrosion inhibitor for iron protection. Low foaming tendency and good hard water tolerance. No negative effect on EP/AW additive performance.
LUVODUR L 190-852,4,6-Tri-(6-Aminocaproic Acid)-1,3,5-TriazineHighly effective corrosion inhibitor for iron protection. Low foaming tendency and good hard water tolerance. No negative effect on EP/AW additive performance.
luvodur®---dicarboxylic-acids-.pdf

LUVODUR® - Carboxylic Acid Amides

ProductChem. DescriptionFeatures and Benefits
LUVODUR HVC 403Carboxylic Acid Amide, based on Primary and Tertiary AminesCorrosion protection of water miscible cutting fluids. High active substance content. Suitable for mineral oil containing concentrates. Very effective co-emulsifier.
LUVODUR HVC 887Carboxylic Acid Amide, based on Primary AminesCorrosion protection of water miscible cutting fluids. High active substance content. Suitable for mineral oil containing concentrates. Very effective co-emulsifier. High alkaline reserve.
luvodur®---carboxylic-acid-amides.pdf

K-White® - Corrosion Inhibiting Pigments

ProductChem. DescriptionFeatures and Benefits
K-White 140WModified Aluminium TriphosphateActive pigment with excellent corrosion protection and very low toxicity. Builds insoluble Iron III-Aluminium-Triphosphate-Complexes in water based systems.
k-white®---corrosion-inhibiting-pigments-.pdf
ProductChem. DescriptionFeatures and Benefits
K-CORR® NF-200LProprietary Heterocyclic DerivativeAshless low viscosity YMD. Excellent thermal, hydrolytic stability. Good demulsification properties. Synergistic with primary and secondary antioxidants. Compliance with FDA 21 CFR 178.3570.
K-CORR® NF-400Sulfur and Nitrogen based ChemistryAshless Outstanding yellow metal protection. Scavenging active sulfur released by sulfur carriers. Good EP additive with very good thermal and hydrolytic stability, provides outstanding FZG performance. Excellent solubility in different base stocks.
LUVODUR® CI BTZBenzotriazoleHighly effective water soluble inhibitor. Excellent staining and corrosion protection of non NF metals preferrably copper. Soluble in most base fluid of Grp I-V types.
yellow-metal-deactivators.pdf

KING Industries - NA-LUBE®

ProductChem. DescriptionFeatures and Benefits
NA-LUBE AO-130Nonylated DiphenylamineExcellent oxidation resistance to lubricants and greases.100% active substance. Mineral oil free and easy to handle.
NA-LUBE AO-142Butylated, Octylated DiphenylamineExcellent oxidation resistance, high TBN and high nitrogen content. Easily blended into all types high performance lubricants. Synergy with NA-LUBE AO-242. Compliance with FDA 21 CFR 178.3570.
NA-LUBE AO-210   2,6-di-tert-Butylphenol100% active phenolic antioxidant. Less volatile than BHT. Low melting point, liquefies with minimal heat. Particularly effective in combination with aminic AO, YMD and K-CORR 1031
NA-LUBE AO-2423,5-di-tert-Butyl-4-Hydroxyhydrocinnamic Acid Alkyl Ester100% active highly effective phenolic antioxidant. Low volatility and low viscosity. Low sludge formation and light colour. Synergy with NA-LUBE AO-142.
NA-LUBE ADTCMethylene-bis-(Dibutyldithiocarbamate)Ashless multifunctional additive with excellent EP, AW and secondary AO properties. Outstanding demulsibility and good thermal stability. Excellent solubility properties in highly paraffinic base stocks
king-industries---na-lube®.pdf

SONGWON - SONGNOX®

ProductChem. DescriptionFeatures and Benefits
SONGNOX® L101Tetrakis[methylene-3-(3,5-di-tert-butyl-4’-hydroxyphenyl) propionate]methaneAshless solid with extremely low volatility and high thermal stability. Excellent for greases and synthetic lubricants. Approved by FDA for use in blending food grade lubricants.
SONGNOX® L107Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionateHigh molecular weight AO with good thermal stability. Ashless solid with low volatility. Very effective in lubricants based on natural oils. Good deposit control performance in engine oils.
SONGNOX® L109Hexamethylenebis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]Excellent thermal stability and high molecular weight. Especially recommended in mineral oil based industrial lubricants. Approved by FDA for use in blending food grade lubricants
SONGNOX® L115Thiodiethylene bis [3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate]Ashless solid with low volatility and excellent thermal stability.
Provides multifunctional activity as primary and secondary AO. Approved by FDA. 
SONGNOX® L135Benzenepropanoic acid,3,5-bis(1,1-dimethylethyl)-4-hydroxy-, C7-9-branched alkyl estersEasy to handle liquid with excellent solubility in mineral oil.
Provides superior protection against oxidation and deposit formation. 
SONGNOX® L224Dilauryl thiodipropionateSecondary thioester antioxidant. Decomposes and neutralizes hydroperoxides, formed by auto-oxidation. Synergistic effects in combination with phenolic antioxidants. Solid.
SONGNOX® L226Ditridecyl thiodipropionateSecondary thioester antioxidant. Decomposes and neutralizes hydroperoxides, formed by auto-oxidation. Synergistic effects in combination with phenolic antioxidants. Liquid form.
SONGNOX® L416Tris(2,4-di-tert-butylphenyl) phosphiteAshless solid with low volatility.
Excellent for mineral and synthetic lubricants in transportation and industrial application. 
SONGNOX® L570Mixture of octylated & butylated diphenylamineControls lubricants viscosity increase due to oxidation. High nitrogen content and excellent protection against thermo-oxidative degradation. Approved by FDA.
SONGNOX® L670Bis(nonylphenyl)amineExcellent protection against thermo-oxidative degradation with effective control over viscosity increase due to oxidation. 
songwon---songnox®.pdf

Lehmann&Voss - LUVODUR®

ProductChem. DescriptionFeatures and Benefits
LUVODUR AO 150Liquid Mixture of Amine/Phenol based AntioxidantsMixture of aminic and high molecular weight phenolic antioxidants. Good oxidation stability of Industrial Lubricants specially in compressor-, gas turbine oils and heat transfer oils.
lehmann&voss---luvodur®.pdf

Lehmann&Voss - LUVOMAXX®

ProductChem. DescriptionFeatures and Benefits
LUVOMAXX BHTButyl HydroxytolueneNon-staining hindered-phenolic antioxidant, low molecular weight, may be easily emulsified. Prevents the development of rancidity and the resulting increase, very efficient peroxid radical delayer.
LUVOMAXX CDPA4-(1-Methyl-1-Phenylethyl)-N-[4-(1-Methyl-1-Phenylethyl)Phenyl]AnilineHigh thermal stability. Synergistic with steric hindered phenolic antioxidant and imidazol derivates.
LUVOMAXX ODPAbis(4-(1,1,3,3-Tetramethylbutyl)Phenyl)AmineHigh thermal stable aminic antioxidant, easy dispersible. Works as oxygen scavenger. Synergistic effects with steric hindered phenolic AO's.
LUVOMAXX SDPADiphenylamine DerivateVery high molecular weight compared to similar aminic antioxidants. Reduced volatility and suitability for use in high temperature applications.
LUVOMAXX TMQ1,2-Dihydro-2,2,4-Trimethylquinoline/OligomersGeneral purpose, high active aminic antioxidant. Excellent resistance to thermo-oxidative ageing, even at lower treat rates, cost efficient. Works as oxygen scavenger. Reduce oil bleeding in glykol based greases.
lehmann&voss---luvomaxx®.pdf

KING Industries - NA-LUBE®

ProductChem. DescriptionFeatures and Benefits
NA-LUBE ADTCMethylene-bis-(Dibutyldithiocarbamate)Ashless multifunctional additive with EP/AW and AO properties. Outstanding demulsibility and good thermal stability. FZG booster. No negative influence on AFNOR filtration.
NA-LUBE AW-6110PAmine Salts of Aliphatic Phosphoric Acid EstersMultifunctional ashless additive with excellent anticorrosion. Excellent solubility properties, antiwear and EP properties. Light colour, low odor, easy to handle. Lower acid no. than NA-LUBE AW-6110.
NA-LUBE AW-6220Proprietary Preparation of Amine Phosphate and Heterocyclic Derivative ChemistryAshless antiwear additive. Excellent rust, corrosion, and yellow metal deactivation properties. Low treat levels. Excellent solubility properties. Outstanding FZG performance at low treat levels.
NA-LUBE AW-6310Proprietary Preparation of Sulfur-Phosphorus-Nitrogen containing ChemistryMultifunctional ashless lubricant additive exhibiting outstanding EP/AW. Rust inhibiting and demulsification properties. Low treat levels and good thermal and hydrolytic stability.
NA-LUBE AW-6330Proprietary Preparation of Phosphorus-Sulfur containing ChemistryMultifunctional ashless lubricant additive. Exhibiting excellent EP/AW and AO properties. Used as a substitute for zinc dialkyldithiophosphates.
NA-LUBE AW-6400FGAmine Salts of Aliphatic Phosphoric Acid EstersNSF HX-1 approved multifunctional additive. Excellent anticorrosion, AW/EP properties. Light color, low odor. Excellent solubility properties.
king-industries---na-lube®.pdf

Lehmann&Voss - LUVOMAXX®

ProductChem. DescriptionFeatures and Benefits
LUVOMAXX ZDTPPrimary Zinc-DialkyldithiophosphateMultifunctional additive, improves EP/AW performance by forming an adsorptive multilayer system. Coefficient of friction can be reduced significantly. Acts additionally as primary and secondary antioxidants as well as corrosion protection additive.
lehmann&voss---luvomaxx®.pdf
ProductChem. DescriptionFeatures and Benefits
AEPD®-852-Amino-1,3-Ethyl-Propan-Diol (85%)Primary amino alcohol which provides a good balance of pH development and reserve alkalinity properties. Improved ferrous corrosion protection and excellent for aluminium processing. Acts as a formaldehyde and sulphur odor scavenger. Reacts reversibly with formaldehyde. Reduces cobalt leaching more than TEA. Enhanced performance of triazine biocides.
ALKATERGE®-E4-Ethyl-2-(8-Heptadecenyl)-2-Oxazoline-4-MethanolLiquid corrosion inhibitor for iron and steel alloys. Low Foaming. Mild oxidative properties. Primary emulsion stabilizer for water-in-oil emulsions, secondary oil-in-water emulsifier. Non-ionic (stable in hard water).
CORRGUARD® series2-Amino-2-Methyl-1-Propanol (75% / 90% / 95%)Very cost efficient neutralizer of acidic ingredients such as carboxylic acids and phosphate esters. Stable emulsion at high pH level with a high base strengh for an extended fluid life. Acts as formaldehyde scavenger. Minimal ammonia release. Minimizes leaching of cobalt and lead.
CORRGUARD® LSA series2-Amino-2-Methyl-1-Propanol (75% / 90% / 95%)High performance primary alkanolamine with very low secondary amine content (< 0.75%, meets TRGS 611). Stable emulsions at high pH. Minimal ammonia release, cobalt leaching and foam generation. High base strength.
CORRGUARD® FLEX2-Amino-1-Butanol,2-Amino-2-Ethyl-1,3-Propanediol (85%)Unique primary amino alcohol stream suitable for low secondary amine formulations. Improved corrosion control on steel and its alloys. Extends fluid life with a wide range of registered biocides. Effective pH control, easy to handle and easy to formulate (100% water soluble). Meets TRGS 611.
CORRGUARD® EXT3-Amino-4-Octanol (85%)Innovative premium neutralizer for Long-Life Metalworking Fluids. Excellent pH stability, low foam generation. Improves corrosion control of iron and steel alloys. Resists extraction into tramp oil. Facilitates formulation of Al-compatible fluids at higher pH. Excellent for low boron and boron-free formulations. Compliant with TRGS 611.
DMAMP-80®2-Dimethylamino-2-Methyl-1-Propanol (80%)Tertiary neutralizing amine, can act as vapor-phase corrosion inhibitor for iron and steel alloys in waterborn systems and various aerosol formulations. Very high base strength for neutralizing acids. Suitable for low secondary amine formulations.
ph-stabilizers-/-neutralizers.pdf
ProductChem. DescriptionFeatures and Benefits
LUVODUR® HVC 221Mixture of Native Fatty Acid EstersImproves the wetting effect and lubricity of neat oils. Synergistic effects with EP/AW additives in the cutting oils.
lubricifiers.pdf
ProductChem. DescriptionFeatures and Benefits
NA-LUBE® FM-1187Molybdenum Chemistry based on Organic type raw materialsLiquid molybdenum-based. Non-phosphorus and non-sulfur friction modifier. Good friction reducing and antiwear properties. Excellent shelf life stability. Limited solubility in Group III and PAO.
NA-LUBE® FM-1191Tungsten Chemistry based on Organic type raw materialsLiquid tungsten-based non-phosphorus, non-sulfur friction modifier. Good friction reducing properties. Synergistic with Mo-based FM and alkylated diphenylaminic antioxidants. Synergy with ZnDTP. Excellent shelf life stability. Limited solubility in Group III and PAO.
LUVODUR® FMX2-Ethylhexyl-Molybdenum DithiophosphateImproves anti-wear properties. Reduces friction in straight oils and greases. Good solubility in standard solvents and mineral oils.
friction-modifiers.pdf
ProductChem. DescriptionFeatures and Benefits
LUVODUR® PAO 400Poly-Alpha-OlefinConventional high viscose PAO (40 mm²/s at 100 °C). Good Viscosity Index and excellent low temperature properties.
LUVODUR® PAO 1000Poly-Alpha-OlefinConventional high voscose PAO (100 mm²/s at 100 °C) Good Viscosity Index and excellent low temperature properties. 
viscosity-modifiers.pdf

Lehmann&Voss - Organic Modifiers

ProductChem. DescriptionFeatures and Benefits
LUVOTIX® R Castor Oil DerivateThickener and anti-settling agent for various applications in non-aqueous organic systems. Controls the rheological properties of low and medium polar systems, process temperatures 35 to 55°C. Viscosity increase effect.
LUVOTIX® HPPolyamideVery fine micronised thickener and anti-settling agent. For solvent-based and solvent-free medium to high polar liquid organic systems, process temperatures 55 to 65°C.
LUVOTIX® P 100-15PolyolefinEffective anti-settling agent. Controls the rheological properties of medium to high polar solvent-based and solvent-free formulations. Well defined particle size distribution, no significant effect on viscosity increase.
LUVOTIX® P 25 XPolyolefin/Xylene (25%)Anti-settling paste without significant viscosity increase effect. For an extended range of polarities and process temperatures. Low to high polar systems, for solvent-based formulations.
lehmann&voss---organic-modifiers.pdf

Lehmann&Voss - Inorganic Modifiers

ProductChem. DescriptionFeatures and Benefits
LUVOGEL® 4 Organically Modified MontmorilloniteCreates in formulations a shear thinning flow profile with thixotropic properties and a slight viscosity increase. Excellent for low to medium polar systems. Activator needed.
LUVOGEL 7Organically Modified MontmorilloniteCreates in formulations a shear thinning flow profile with thixotropic properties and a slight viscosity increase. Excellent for medium to high polar systems. Activator needed.
LUVOGEL W2NSynthetic Na-Li-Mg-Silicate (Hectorite)A strong shear thinning flow profile with thixotropic properties is achieved in water-based formulations. Easy dispersible and suitible for use in a wide pH-range.
lehmann&voss---inorganic-modifiers.pdf
ProductChem. DescriptionFeatures and Benefits
TYZOR® BTP n-ButylpolytitanateCan act as inorganic binder alone or in combination with other metal oxide for mineral filled systems providing high temperature resistance. Low VOC content.
TYZOR® TnBTTetra-n-ButyltitanateVery useful binder and adhesion promoter or cross-linker for OH- functional polymers, 100% active. Miscible in most organic solvents.
TYZOR® AA-105Titanium AcetylacetonateExcellent as crosslinking agent for OH- functional polymers or binders, to promote adhesion or act as binder itself. Miscible in most organic solvents. Solvent free, 100% active.
crosslinking-agents.pdf


You can obtain further information in our product brochure.